Rigid Strander Line

Rigid Strander Line Main Characteristic

• The main frame is manufactured from a welded construction. Welding stresses have been relieved by stress-relief annealing.
• The unit is supported on high-capacity roller bearings.
• Reels are arranged in three rows at 120° intervals.
• Pintles are mounted on roller bearings.
• In case of a wire break, the entire line stops automatically.
• An auxiliary motor-gearbox will be used to bring the cage into the loading position. A high-reduction gearbox will be placed in between, and the cage will be pneumatically locked.
• Automatic reel loading is provided, and the pintle open/close system is designed accordingly.
• Inside the rotating section, auxiliary air tanks of sufficient capacity are installed to supply the brakes. Additionally, the system air will be continuously fed through an external rotary air connection.
• At the divider section of each rotating cage, the tension of one reel is measured. As the reel empties, the brake setting is automatically adjusted.
• For this purpose, the wire tension is read by the PLC, and the air pressure of the entire cage is precisely controlled, allowing the brakes to be automatically released to the required level.